Aqua Tech

By · Sunday, October 25th, 2009

Aqua Tech

Door signs of the ADA is one of the most common types of sign used to identify rooms with doors in office buildings, hospitals, schools and businesses of all sizes.

The acquisition and display signs of the ADA is one of the simplest and cheapest ways to achieve compliance with the rules ADA.

For your business to comply with the standards set in the Americans with Disabilities Act, you need to know what are the safe places to hang their tactile, close the doors.

Proper positioning of the tactile door signs

For single doors, tactile mount their side of the lock on the door of the room or office. This is the most suitable for any signs signaling and also in compliance with ADA standards.

If the room has double doors with one active door swing, the sign can be mounted inactive in the leaf. This means that only one door will not be used to enter the area and has been detained.

If the room has double doors with door actively rolling two sheets, the sign must be mounted to the right of the right hand door.

When there is no wall space to hang signs on the side door lock simple or right side door of double doors, the wall closest to the side must be used.

It's easy to find buildings with Examples of all these types of posts y. door sign I suggest visiting the hospitals and office buildings to see examples of the gate position of the sign if you need further guidance.

How to determine a safe place for their ADA door signs

To be used safely, tactile signals must be mounted in a safe at the door of the room indicated. Visits to the room should be kept separate from the swinging doors, while the search room you want to find.

According to the official guidelines of the ADA, a floor measuring 18 inches (455 millimeters) for a minimum of 18 inches is used. The measurement is done in the swing of the door edge to the center of the letters touch the signal.

The rules suggest using an angle of 45 degrees of the door was opened to determine adequate space has been allowed. The minimum of 18 inches of the face and sign on the right of the door should provide necessary authorization for secure mounting.

You can choose to leave more space if it is determined that the area will experience heavy foot traffic. You will to keep the signal close enough to clearly indicate the door that is meant to identify that room. But as long as you remember to measure 18 inches minimum from the center of tactile text, the sign of the doors shall be in accordance with ADA standards.

ADA compliance

These guidelines apply to permanent signs for the rooms, offices and toilets.

If you have any special needs in relation to specific uses the rooms in your building or if you have other questions, please contact the U.S. government for more information.

However, these guidelines are acceptable to the majority of Braille tactile door available on the market today. Whether you use standard or custom signage tactile creations, correct position of the door sign is easy to implement and maintain your business complies with ADA standards.

Disclaimer: The information above is intended as general guidance for compliance with the Americans with Disabilities Act (ADA). The author assumes no responsibility for its completeness or accuracy. This article is not a legal document and is not intended to be viewed as a substitute for professional legal advice.

Anthony Bogner has over 10 years experience in crafting and selling architectural signage, including literature holders, directories, and ADA tactile signs. Visit http://www.acrylicsignworld.com for tips, advice, and information about acrylic signs for businesses of all sizes. Our website also offers the best values on handcrafted architectural signage products.

Aqua-Tech 30-60 Tutorial

[affmage source=”ebay” results=”12″]Aqua Tech[/affmage]
[affmage source=”amazon” results=”6″]Aqua Tech[/affmage]
[affmage source=”clickbank” results=”4″]Aqua Tech[/affmage]

 

Leave a Comment

You must be logged in to post a comment.